Solid Cemented Tungsten Carbide Rods with One Coolant Hole
Short Description:
Performances:
1. 100% raw material
2. With strict tolerance extent control
3. Excellent wear resistance & high toughness
4. Have very good thermal & chemical stability
5. Anti-deformation & deflection
6. A special Hot Isostatic Press (HIP) process
7. Adopt advanced automatic extrusion equipment
8. Both blank and finished tungsten carbide rods available
9. Can reach a mirror effect surface after accurate grinding and polishing
10. Customized diameters and length are also welcomed.
Applications
For making the drill bits, end-mills, reamers.
Proctuction Process
Powder making → Formula according to usage requirements → Wet grinding → Mixing → Crushing → Drying → Sieving → Addition of forming agent → Re drying → Preparation of mixture after sieving → Pelleting → Pressing → Forming → Low pressure sintering → Forming (blank) → Flaw detection and inspection → Outer circle grinding and precision grinding (blank does not have this process) → Size detection → Packaging → Warehousing
Quality Control
1. All raw materials are tested in terms of density, hardness and TRS and dropped from 1.2m higher place before use
2. Every piece of product goes through in-process and final inspection
3. Every batch of product can be traced
Grades Features and Uses
|
GRADE |
Cobalt content |
Grain size |
Density |
Hardness |
T.R.S |
|
(%) |
μ |
g/cm3 |
HRA |
N/mm2 |
|
|
YG6X |
6 |
0.8 |
14.9 |
91.5 |
3400 |
|
YL10.2 |
10 |
0.6 |
14.5 |
91.8 |
4000 |
|
YG15 |
15 |
1.2 |
14 |
87.6 |
3500 |
|
XU30 |
12 |
0.4 |
14.1 |
92.5 |
4000 |
YG6X : suitable for chilled cast iron, ball milling of cast iron, gray cast iron, heat-resistant alloy steel cutting of small and medium-sized cross-section of high-speed finishing, are processed reamer, aluminum alloy, red brass, bronze, plastic of choice.
YL10.2: Mainly used to process steel, cast iron, stainless steel, heat-resistant steel, nickel-based and titanium alloys and other materials, usually made into the twist drill, end mill, tap, generic tools, such as gun drilling materials.
YG15: Suitable for the overall production of stamping dies and tools, such as red needles, punch, dies and other accessories.
XU30: Suitable for high-speed cutting of mold steel (especially suitable for heat treated steel ≤ HRC50), high-temperature alloys, stainless steel, glass fiber reinforced plastics, etc. Especially recommended for making high gloss knives.
| Type | D(mm) | Tolerance of D(mm) | d(mm) | Tolerance of d(mm) | L (mm) | Tolerance of length(mm) |
| Φ3*Φ1*330 | 3 | +0.2/+0.5 | 1 | ±0.1 | 330 | 0/+5.0 |
| Φ4*Φ1*330 | 4 | +0.2/+0.5 | 1 | ±0.15 | 330 | 0/+5.0 |
| Φ5*Φ1*330 | 5 | +0.2/+0.5 | 1 | ±0.15 | 330 | 0/+5.0 |
| Φ6*Φ1.5*330 | 6 | +0.2/+0.5 | 1.5 | ±0.15 | 330 | 0/+5.0 |
| Φ8*Φ1.5*330 | 8 | +0.2/+0.6 | 1.5 | ±0.15 | 330 | 0/+5.0 |
| Φ8*Φ2*330 | 8 | +0.2/+0.6 | 2 | ±0.15 | 330 | 0/+5.0 |
| Φ10*Φ2*330 | 10 | +0.3/+0.6 | 2 | ±0.2 | 330 | 0/+5.0 |
| Φ12*Φ2*330 | 12 | +0.3/+0.6 | 2 | ±0.2 | 330 | 0/+5.0 |
| Φ16*Φ3*330 | 16 | +0.3/+0.6 | 3 | ±0.25 | 330 | 0/+5.0 |
| Besides the specifications mentioned above, special specifications can be supplied according to your requirements. | ||||||
FAQ
Yes, we can customize for you as your requirements.
Generally it is 3~5 days if the goods are in stock; or it is 10-25 days if the goods are not in stock, depending on order quantity.
Generally we don't provide free samples. But we can deduct sample cost from your bulk orders.
Always a pre-production sample before mass production; Always final Inspection before shipment .
