Solid Carbide 4-Flute End Mills

Short Description:

High-performance general milling solid carbide 4-flute end mills for steel and cast iron
We have extensive practical experience in this field and we can offer you almost types of solid carbide end mills.


Product Detail

Product Tags

GM series Introduction

AL series end mills for AL machining.
Excellent tool surface quality and good chips evacuation improve the cutting conditions and greatly extend tool life.
Chip pocket with unique shape exerts excellent performances even in slot and cavity machining.
Sharp cutting edge and large helical angle design effectively prevent built-up edge.
Anti-vibration design of whole edge can suppress the chattering during machining and improve surface quality.
Tool type:AL-3E-D6.0 Dimensions:Ø6.0mm
Workpiece material:LC4
Rotating speed:13000r/min (250m/min)
Feed speed:1950mm/min (0.15mm/r)
Axial cutting depth:ap=9.0mm
Radial cutting depth:ae=1.0mm
Cutting style:Complicated cavity machining
Cooling system:air blow
Machine tool: MIKRON UCP 1000

product_display_1
product_display_2

Even the complicated machining of thin- wall cavity parts can be achieved easily.

Parameter

Parameters

Application

Applicable material diagram

FAQ

What kinds of end mills do you have?

According to the shape we have so many types , such as flattened end mill, radius end mill, ball nose end mill, high-feed-rate end mill, long neck end mill, tiny head end mill and so on.

The difference of end mills and drill bits?

The main different is processing requirements: end mills are for milling, while drill bits are for drilling and reaming. Although in some cases, the milling cutter can also drilling, but it is not the mainstream.

Do you have a minimum order quantity?

If the type we have in stock, any quantity will be OK.

Can you customize ?

Yes, we can customize for you as your requirements.

What basic information does the customer need to provide in order to get the quotation?

First, the workpiece material.
Second, the shape and dimension details:shank diameter, flute diameter, flute length and total length, the number of the teeth.
Third, if you need customized, offer us the drawing will be better.


  • Previous:
  • Next: