High-performance general milling PM series
Short Description:
High performance universal machining PM Series 4-flute flattened end mills with straight shank and long cutting edge suitable for various steel and cast iron. We have extensive practical experience in this field and we can offer you almost types of solid carbide end mills.
PM series Introduction
Optimized geometry, improves chip removal and chip forming with reduced cutting force.
Higher feed rates and improved metal removal rate for efficient machining, due to high stability of cutting edge and rigid tool structure.
Tool diameter: Ø6.0mm
Tool type: a) PM-4E-D6.0
b）Tool from overseas
manufacturer
Machine tool: Mikron UCP1000
Workpiece material: NAK80(40HRC)
Cooling system: air blow
Machining operation: side milling (down milling)
Cutting parameters: Vc=100m/min,
ap=9mm, ae=0.6mm, Fz=0.04mm~0.16mm
With excellent wear resistance and toughness, high wear resistance and breakage resistance is achieved even during high performance milling.
Tool type: PM-4E-D6.0 Radial cutting depth: ae=0.6mm
Diameter: Ø6.0mm Cutting style: side milling (down milling)
Workpiece material: NAK80(40HRC) Cooling system: air blow
Rotating speed: 5300r/min (100m/min) Machine tool: MIKRON UCP1000
Feed speed: 1696mm/min (0.32mm/r) Tool overhang: 22mm
Axial cutting depth: ap=9mm
Parameter
Application
FAQ
According to the shape we have so many types , such as flattened end mill, radius end mill, ball nose end mill, high-feed-rate end mill, long neck end mill, tiny head end mill and so on.
The main different is processing requirements: end mills are for milling, while drill bits are for drilling and reaming. Although in some cases, the milling cutter can also drilling, but it is not the mainstream.
If the type we have in stock, any quantity will be OK.
Yes, we can customize for you as your requirements.
First, the workpiece material.
Second, the shape and dimension details：shank diameter, flute diameter, flute length and total length, the number of the teeth.
Third, if you need customized, offer us the drawing will be better.
